Home  /  Products  /  API 16C Manifold
  • Kill Manifold

  • Kill Manifold

  • Kill Manifold

  • Kill Manifold

  • Kill Manifold

Kill Manifold

1.The kill manifold is main device for oil-gas well pressure control technology and used to balance well bottom pressure by pumping drilling fluid into the well;

2.Open flow to release well bottom pressure;

3.Possible for special operation;
4.To wash the well by injecting clean water or fire extinguishing agent;
5.The kill line manufactured by our company conforms to API 16C, NACE MR0175 Standards;
6.Kill line can be designed and manufactured specially according to users’ needs; 
7.In case drilling fluid cannot cycle normally, it is necessary to fill drilling fluid into the pup joint and connect high pressure pump with kill line to lead drilling fluid into well bore through check valve;
8.In case well mouth was completely sealed by flashboard, well control operation can be performed by filling drilling fluid into wellhole by force by kill manifold.

SpecificationYG-21YG-35YG-70YG-105
Cold working press Mpa(psi)21Mpa(3000psi)35Mpa(5000psi)70Mpa(10000psi)105Mpa(15000psi)
Nominal diameter2-1/16in~4-1/16in
Working temperature-29~121℃
Product specification levelNo less than PSL3
Material grade (valve, joint)EE-FF
Working mediummud, petroleum, natural gas



Related Products